cover

What are the Main Olet Fittings?

9 maggio 2018 | Francesco Grillo | Informazioni tecniche

Olet Fittings (also called Branch Connection Fittings or Outlet Fittings) are fittings which provide an outlet from a larger pipe to a smaller one (or one of the same size).


The main pipe onto which the branch connection is welded is usually called the Run or Header size. The pipe to which the branch association or connection gives a pipe is conventionally called the Branch or Outlet estimate. Branch connections are in all sizes, sorts, bores, and classes, in various steel grades.

 

11 Types of Branch connections

There are 11 types of Branch Connections including:

  1. Weldolet (WEL)
  2. Threadolet (TOL)
  3. Sockolet (SOC)
  4. Elbolet (ELO)
  5. Insert Weldolet
  6. Brazolet
  7. Coupolet
  8. Nipolet
  9. Flexolet
  10. Latrolet (LOL)
  11. Sweepolet

 

Unless otherwise specified, the above trademarked names are registered by Bonney Forge. These fittings can be also found under different names. The user must verify that the fittings meet applicable standards, such as ANSI/ASME B16.9, ANSI/ASME B16.25 or MSS SP-97.

The mostly used olet fittings are sockolets and threadolets, weldolets and elbolets.

 

Sockolet

A sockolet has the same basic design as a “weldolet” or “threadolet” where the major difference is that a sockolet has a socket for welding while the weldolet has got a buttweld connection. This makes a 90° branch and comes in full size or reducing for a straight piece of pipe. Sockolets are available in Class 3000, 6000 and 9000 for high pressures.

 

Threadolet

A threadolet has the same basic design as a weldolet. However the main difference is the fitting has a female threaded connection to link to the branch connection. This makes a 90° branch and comes in full size or reducing for a straight piece of pipe.

Typically, it is in the size range of 1/2″ to 2″ and is welded over a hole either drilled or burned in the pipe.

 

Weldolet

A Weldolet® makes a 90° branch connection and – comes in full size or reducing for a straight piece of pipe. A weldolet is designated by the run length by the branch length. For example a 6-inch weldolet on a 10-inch pipe would be a 10×6 Weldolet. A weldolet is designed to minimize stress concentrations and provide integral reinforcement without the need for reinforcing the weld.

 

Elbolet

An elbolet is used on 90° long radius elbows (most common), short radius elbows (seldom used) and can be used on 180° returns. It is typically used for instrumentation connections and thermowells. Thermowells are tubular fittings used to protect temperature sensors installed in industrial processes. A thermowell consists of a tube closed at one end and mounted in the process stream.

Elbolets can be used as a drain connection when there is not enough room to use a Weldolet. The Elbolet is available with buttweld, socketweld or threaded connections.

 

The Weldolets

Weldolets or welding olets or welding branch association fittings are the most well-known among all the olets. These are principally sorted as butt weld fittings, as these are welded into the branch pipe. The principle favorable position of weldolets is that it limits stress focus as are well-suited for high pressure weight applications.

Weldolet is the kind of fitting used to make a branch with the littler size of primary pipe. Weldolet normally utilized as a part of piping with high pressure weight and temperature where the connection with the joint type butt weld. The utilization of strengthening pad is not required on weldolet.

 

The Sockolets

Sockolets are essentially like weldolets and threadolets, aside from the way that in Sockolets there is a unique socket accommodated for welding. This gives it a perfect 90 degree turn. This likewise makes it able for utilizing as a part of applications that request high pressure weights.

 

Weldolets Main Specifications

Type: Forge Pipe Olets / Forge Pipe Outlets

  1. Size: 1/8″NB TO 4″NB (DN6 x DN100)
  2. Class: 3000 LBS, 6000 LBS & 9000 LBS (Sch40, Sch80/Xs Sch160 Xxs)
  3. Standards: ASME/ANSI B16.11, MSS-SP-97, MSS-SP-79, JIS B2316, BS 3799, etc.
  4. Connect Type: Welded, threaded, BW, SW
  5. Materials: Stainless steel: ASTM A182 F304, F304L, F316, F316L, F317L, F321, F321H, F347, F347H, F310, F44F51, S31803, A182, F43, S32750
  6. Line Pipe: ASTM A694 F42, F46, F52, F56, F60, F65, F70Low

 

Optional Value Added Services: Hot Rolling, Cold Rolling, Galvanizing, Heat Treatment, Tempering, Electro Polishing, Threading, Sand Blasting, Soldering.

Steel Available can supply through its network of qualified manufacturers and stockists all types of branch connection fittings as per customer preferences.

 

 

If you want to have more information about the article or you want to share your opinion with us, contact us at .

Please notice that you might be interested in the other product-related articles we’ve published:

  • What are the Main Types of Flanges?

  • Conferences, Trade Shows and Exhibitions 2018

  • Counterfeit Steel is a Big Worry in the Industry

 


We are Steel Available, an online supplier relationship management and sourcing platform connecting suppliers and buyers from the heavy industry. We are developing the first ecosystem in the heavy industry, which allows clients to efficiently manage and automate their supply chains using web-based tools and services. Our goal is to reduce the hidden risk in value chains by providing the information that matters, from compliance to quality assurance, creating value for all stakeholders.

To get more information you can download our brochure.